#Ssc epson reset epson xp 200 how to#
#Ssc epson reset epson xp 200 drivers#

You can reset the 'pampers' waste ink counter using a special PrintHelp utility from the SuperPrint development team (Resetters). If the inkjet inkjet pad is full, the service technician should take the following actions: When the counter of the amount of waste ink, presumably drained into the sump, reaches the value preset in the printer's control program, the printer first displays a warning about the imminent end of the life of the absorbent pad, and soon completely blocks the ability to send a print job. Since the volume of ink pumped out of the head during cleaning procedures is approximately known, and the capacity of the sump is also known, it is not difficult to calculate when it is full.

In reality, this system is nothing more than a program counter that counts the number of times the printer is turned on and all the head cleaning procedures have been performed. To avoid such an extremely unpleasant situation, absolutely all inkjet printers are equipped with a waste ink control system. Since the volume of the container for collecting ink, with the absorber located in it, has a certain limitation, then sooner or later, there comes a time when the containers overflow, and ink begins to flow out, which becomes the cause of contamination of the printer itself and everything that surrounds it.

Also, when starting regular cleanings through the printer driver, ink is pumped from the cartridges through the print head into the absorber. Where does waste ink come from in an inkjet printer? Each time it is turned on, the print head is automatically cleaned - a small amount of ink is pumped from the cartridges into the print head, which at this moment is in the extreme right (left) position of the printer, and the ink is “dumped” into the “diaper”. This 'diaper' is a container in which there is an absorbent material that absorbs waste ink well. In all inkjet printers, a special container is used to collect waste ink (Waste Ink), which is often called a 'pampers'. Moreover, a warning about the imminent end of the service life of the absorbent lining (diaper) also pops up in the form of a system message on the computer monitor.Īfter the warning message appears, you have the opportunity to print another 15-20 images (photos) of A4 format, after which the printer will refuse to print, until the waste ink counter is reset. blinking of two red LEDs under the printer buttons, and also pops up an error window on the computer monitor. 'With the active operation of an inkjet printer, there comes a moment when the printer refuses to work and gives an error message, with a request to contact the service center. In addition to resetting, I also recommend cleaning the gasket under the cartridges. Select the top checkbox and click check again.Īs you can see, the reset of the Epson diaper was successful! But remember, it's no coincidence that Epson throws this error. The program will ask you to turn off the printer.Ĭlick ok, after it turns on and we can check. Select the top counter and click Initialization, i.e. But if your printer swears at the diaper, then in the bottom field you will have a value of 100%. I have already reset the counter and managed to print a number of pages. We put all the checkboxes and click Check, thereby we will check the counters.

Click ok and then select Paricular adjutment mode. Otherwise, the program will not see the printer port.

#Ssc epson reset epson xp 200 drivers#

The main thing is that the drivers are installed. If your model is not there, it's okay, just choose like mine. So if suddenly it does not fit your printer, then look for a different version.Īnd so, after starting, select the model and port: It is called the Epson Adjustment program. Run the program to reset the epson diaper. If the program does not help, then you can try SSC Service Utility or. If PrintHelp did not reset the counter for you for free, then on the Internet there is the Epson Adjustment Program (Epson has forbidden it to spread). I started googling what it is in general) On the Internet there is a program for resetting epson counters, called PrintHelp, but it asks for codes that need to be bought! Well, this is not the case) But on some printers it turns out to drop the Epson diaper for free. But the printer began to display this message: The service life of the ink-absorbing pad has expired. Īt first I thought, I'll do a few calibrations and everything will be solved. They gave it to be repaired, they were told that it cannot be done, they need some codes. At relatives, the printer began to print in black and yellow.

#Ssc epson reset epson xp 200 how to#

Hello everybody! Today I will show you how to reset the pampers on the Epson XP-302 printer, but in this example, you can reset them on other models.

Ssc epson reset epson xp-200